20660 Collet probe arm flexible with Coax Cable BNC connector (cable & needle included)

SKU 20660
$329.00
In stock
1
Product Details

The 20660 is isolated near the needle/probe for less capacitance. The clamping collet has three slots for holding the needle at 60, 75, 180 degrees. It is connected to 3 feet of 50 ohm RG 174 coaxial cable ended in a BNC male connector and can be mounted on any of our translation stages.

The 20660-T Triax version is isolated near the needle/probe for less capacitance and is the same physical size as the Coax version. The clamping collet has three slots for holding the needle at 60, 75, 180 degrees. It is connected to 4 feet of 50 ohm triax cable with a 3 lug triax male connector.

Positioners can be damaged by placing too much load or using them as a vice.

Save this product for later

Quality Micropositioners and Manipulators since 1978 specializing in analytical probing

and sub micro positioning.

© 2019 by Quater-Research & Development

Site Created by TRUE+brand Experience