20660-T Collet probe arm flexible with Triax cable and connector
The 20660-T The clamping collet has three slots for holding the needle at 60, 75, 180 degrees. It is connected to 3 feet of 50 ohm RG 174 Triax cable and connector ended in a BNC male connector and can be mounted on any of our translation stages.
The 20660-T Triax version is isolated near the needle/probe for less capacitance and is the same physical size as the Coax version. The clamping collet has three slots for holding the needle at 60, 75, 180 degrees. It is connected to 4 feet of 50 ohm triax cable with a 3 lug triax male connector.
Either probe can be mounted on all of our translation stages using various back plates. The 20545 Suss plate works well as does the 20239 plain back plate that is used in the 20240 and 20249 probe arm holders.
Positioners can be damaged by placing too much load or using them as a vice.